中文核心期刊

中国科技核心期刊

机械工程领域高质量科技期刊(T3)

科技期刊世界影响力指数期刊(WJCI)

RCCSE中国核心学术期刊

INSPEC、AJ、JST数据库收录期刊

2025年第4期目次

设计与研究

基于卷积时空混合神经网络的剩余使用寿命预测

刘澳龙,唐向红,陆见光,等.基于卷积时空混合神经网络的剩余使用寿命预测[J].组合机床与自动化加工技术,2025(4):1-7.

LIU Aolong, TANG Xianghong, LU Jianguang, et al. Remaining useful life prediction based on convolutional spatio-temporal hybrid neural network[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):1-7.

基于U-Net的工件轮廓提取方法的研究

郭凯旋,王吉芳,刘相权,等.基于U-Net的工件轮廓提取方法的研究[J].组合机床与自动化加工技术,2025(4):8-12.

GUO Kaixuan, WANG Jifang, LIU Xiangquan, et al. Research on workpiece contour extraction method based on U-Net[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):8-12.

基于数字孪生的国产五轴数控机床虚拟调试系统的研究与实现

刘国强,段明皞,王堃宇,等.基于数字孪生的国产五轴数控机床虚拟调试系统的研究与实现[J].组合机床与自动化加工技术,2025(4):13-17,22.

LIU Guoqiang, DUAN Minghao, WANG Kunyu, et al. Research and implementation of a virtual commissioning system for domestic five-axis NC machine tool based on digital twin[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):13-17,22.

机床立柱的竹子结构仿生设计及性能分析

李有堂,连虎强.机床立柱的竹子结构仿生设计及性能分析[J].组合机床与自动化加工技术,2025(4):18-22.

LI Youtang, LIAN Huqiang. Bionic design and performance analysis of bamboo structure of machine tool column[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):18-22.

装片机运动控制平台模型参数辨识应用

张翔,花国祥,朱友为,等.装片机运动控制平台模型参数辨识应用[J].组合机床与自动化加工技术,2025(4):23-26,31.

ZHANG Xiang, HUA Guoxiang, ZHU Youwei, et al. The applied research on model parameter identification for chip loading machine motion control platform[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):23-26,31.

正多边形织构化密封端面的摩擦磨损特性研究

刘磊,穆塔里夫·阿赫迈德,樊智超.正多边形织构化密封端面的摩擦磨损特性研究[J].组合机床与自动化加工技术,2025(4):27-31.

LIU Lei, MUTELLIP Ahmat, FAN Zhichao. Frictional wear characteristics of orthopolygonal textured seal end faces［J］. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):27-31.

基于EKOA-ELM的压电型三维力传感器解耦算法

何祥,刘勇,刘诚,等.基于EKOA-ELM的压电型三维力传感器解耦算法[J].组合机床与自动化加工技术,2025(4):32-36,42.

HE Xiang, LIU Yong, LIU Cheng, et al. Decoupling algorithm for piezoelectric three-dimensional force sensor based on EKOA-ELM[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):32-36,42.

D-H坐标修正的工业机械手逆运动学研究

孙伏.D-H坐标修正的工业机械手逆运动学研究[J].组合机床与自动化加工技术,2025(4):37-42.

SUN Fu. Research on inverse kinematics of industrial manipulator D-H coordinate modification[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):37-42.

基于视觉处理的带束鼓自动纠偏控制系统研究

徐子茗,赵晶,张平.基于视觉处理的带束鼓自动纠偏控制系统研究[J].组合机床与自动化加工技术,2025(4):43-46,51.

XU Ziming, ZHAO Jing, ZHANG Ping. Research on automatic edge correction control system for belt drum based on visual processing[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):43-46,51.

高精密装片头运动平台摩擦力测试与模型辨识研究

梁伟明,钱承山,朱友为,等.高精密装片头运动平台摩擦力测试与模型辨识研究[J].组合机床与自动化加工技术,2025(4):47-51.

LIANG Weiming, QIAN Chengshan, ZHU Youwei, et al. Research on friction test and parameter identification of high precision chip loading motion platform[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):47-51.

基于PSO-LSTM的碳纤维增强聚合物铣削能耗预测

张华,张福童,鄢威,等.基于PSO-LSTM的碳纤维增强聚合物铣削能耗预测[J].组合机床与自动化加工技术,2025(4):52-57,65.

ZHANG Hua, ZHANG Futong, YAN Wei, et al. Energy consumption prediction for carbon fiber reinforced polymer milling based on PSO-LSTM[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):52-57,65.

多传感器协同旋转测量管道内腔截面轮廓方法

解玉成,孙晓,姚良志,等.多传感器协同旋转测量管道内腔截面轮廓方法[J].组合机床与自动化加工技术,2025(4):58-65.

XIE Yucheng, SUN Xiao, YAO Liangzhi, et al. Multi-sensor cooperative rotational measurement of cross-sectional profiles of free-form inner cavities of pipes[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):58-65.

基于线结构光的焊缝光条亚像素中心提取方法

杨宏韬,李浩,白昊天,等.基于线结构光的焊缝光条亚像素中心提取方法[J].组合机床与自动化加工技术,2025(4):66-70,77.

YANG Hongtao, LI Hao, BAI Haotian, et al. Welding seam light strip sub-pixel center extraction method based on line structured light[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):66-70,77.

2T1R印花定位双模式并联机器人机构设计与分析

王琰,郭飞飞,梁俊侨,等.2T1R印花定位双模式并联机器人机构设计与分析[J].组合机床与自动化加工技术,2025(4):71-77.

WANG Yan, GUO Feifei, LIANG Junqiao, et al. Design and analysis of 2T1R printing positioning dual-mode parallel robot mechanism[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):71-77.

无铁芯永磁同步直线电机温升特性与定位精度研究

梅智发,朱继元,卢飞泉,等.无铁芯永磁同步直线电机温升特性与定位精度研究[J].组合机床与自动化加工技术,2025(4):78-82,86.

MEI Zhifa, ZHU Jiyuan, LU Feiquan, et al. Research on temperature rise characteristics and positioning accuracy of ironless core permanent magnet synchronous linear motors[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):78-82,86.

基于LMedS的WTLSD拟合平面算法研究

任永强,臧昌禹,胡长路.基于LMedS的WTLSD拟合平面算法研究[J].组合机床与自动化加工技术,2025(4):83-86.

REN Yongqiang, ZANG Changyu, HU Changlu. Research on fitting plane algorithm based on LMeds-WTLSD[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):83-86.

基于光轴法的深孔零件轴线直线度的测量研

赵富,王健,王少锋,等.基于光轴法的深孔零件轴线直线度的测量研究[J].组合机床与自动化加工技术,2025(4):87-91.

ZHAO Fu, WANG Jian, WANG Shaofeng, et al. Research on measuring the straightness of the axis of deep hole parts based on optical axis method[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):87-91.

刘涛,赵晴晴,俞亚伟,等.永磁同步电机并行可切换式模型预测控制研究[J].组合机床与自动化加工技术,2025(4):92-97.

LIU Tao, ZHAO Qingqing, YU Yawei, et al. Research on parallel switchable model predictive control for permanent magnet synchronous motor[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):92-97.

基于在线转矩补偿器的开关磁阻电机径向力控制

贲彤,王洪亮,陈龙,等.基于在线转矩补偿器的开关磁阻电机径向力控制[J].组合机床与自动化加工技术,2025(4):98-101,106.

BEN Tong, WANG Hongliang, CHEN Long, et al. Online torque compensator-based radial force control of switched reluctance motors[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):98-101,106.

基于并行球形译码算法的PMSM多步预测控制

刘涛,娄瀚文,李跃华,等.基于并行球形译码算法的PMSM多步预测控制[J].组合机床与自动化加工技术,2025(4):102-106.

LIU Tao, LOU Hanwen, LI Yuehua, et al. Multi-step model predictive control for PMSM based on parallel SDA[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):102-106.

基于Udwadia-Kalaba理论的外骨骼自适应鲁棒轨迹跟踪控制

张名琦,沙连森,史文青,等.基于Udwadia-Kalaba理论的外骨骼自适应鲁棒轨迹跟踪控制[J].组合机床与自动化加工技术,2025(4):107-112,117.

ZHANG Mingqi, SHA Liansen, SHI Wenqing, et al. Adaptive robust trajectory tracking control of power-assisted exoskeleton based on Udwadia-Kalaba theory[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):107-112,117.

基于分布建模的磁瓦表面缺陷检测

郭宏,李欣伦,张德华,等.基于分布建模的磁瓦表面缺陷检测[J].组合机床与自动化加工技术,2025(4):113-117.

GUO Hong, LI Xinlun, ZHANG Dehua, et al. Distribution modeling based surface defect detection for magnetic tiles[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):113-117.

轻量级重参数化的PCB缺陷检测算法

孙铁强,于洪健,宋超,等.轻量级重参数化的PCB缺陷检测算法[J].组合机床与自动化加工技术,2025(4):118-123,128.

SUN Tieqiang, YU Hongjian, SONG Chao, et al. Lightweight re-parameterized PCB defect detection algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):118-123,128.

TPMSLM温升对霍尔传感器位置检测影响研究

张鲁宏.TPMSLM温升对霍尔传感器位置检测影响研究[J].组合机床与自动化加工技术,2025(4):124-128.

ZHANG Luhong. Research on the influence of temperature changes on Hall sensor position detection in TPMSLM[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):124-128.

神经网络优化非线性磁链的双三相PMSM无感控制

赵化勇,田伟,吉敬华.神经网络优化非线性磁链的双三相PMSM无感控制[J].组合机床与自动化加工技术,2025(4):129-132,139.

ZHAO Huayong, TIAN Wei, JI Jinghua. Sensorless control of dual three-phase PMSM based on nonlinear flux observer optimized by neural network[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):129-132,139.

基于ALIF和IMOMEDA的滚动轴承弱故障冲击特征增强提取方法

姜鹏立,沈晨,罗洁思.基于ALIF和IMOMEDA的滚动轴承弱故障冲击特征增强提取方法[J].组合机床与自动化加工技术,2025(4):133-139.

JIANG Pengli, SHEN Chen, LUO Jiesi. Enhanced extraction of weak fault impact features of rolling bearings based on ALIF and IMOMEDA[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):133-139.

叶娜,周学良,张映锋,等.改进YOLOv8的汽车制动器装配缺陷检测算法[J].组合机床与自动化加工技术,2025(4):140-145,151.

YE Na, ZHOU Xueliang, ZHANG Yingfeng, et al. Automotive brake assembly defect detection on improved YOLOv8[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):140-145,151.

球轴承内圈沟道精密磨削试验及表面质量分析

蒋心想,赵华东,张瑞,等.球轴承内圈沟道精密磨削试验及表面质量分析[J].组合机床与自动化加工技术,2025(4):146-151.

JIANG Xinxiang, ZHAO Huadong, ZHANG Rui, et al. Precision grinding experiment and surface quality analysis of the ball bearing inner raceway groove[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):146-151.

基于改进YOLOv5算法的齿轮表面缺陷检测方法

马天龙,李学伟,丁峰,等.基于改进YOLOv5算法的齿轮表面缺陷检测方法[J].组合机床与自动化加工技术,2025(4):152-156,160.

MA Tianlong, LI Xuewei, DING Feng, et al. Gear surface defect detection method based on improved YOLOv5[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):152-156,160.

基于Box-Behnken设计的增材制造TC4铣削参数优化

卢一铭,金成哲,王俊杰,等.基于Box-Behnken设计的增材制造TC4铣削参数优化[J].组合机床与自动化加工技术,2025(4):157-160.

LU Yiming, JIN Chengzhe, WANG Junjie, et al. Optimization of milling parameters for additive manufacturing TC4 based on Box-Behnken design[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):157-160.

基于改进麻雀搜索算法的滚子圆度误差评定方法

刘振,杨文军,张子龙,等.基于改进麻雀搜索算法的滚子圆度误差评定方法[J].组合机床与自动化加工技术,2025(4):161-166,172.

LIU Zhen, YANG Wenjun, ZHANG Zilong, et al. A roller roundness error evaluation method based on improved sparrow search algorithm[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):161-166,172.

改进YOLOv8的带钢表面缺陷检测技术

杜娟,南晓林,晋美娟,等.改进YOLOv8的带钢表面缺陷检测技术[J].组合机床与自动化加工技术,2025(4):167-172.

DU Juan, NAN Xiaolin, JIN Meijuan, et al. Improved YOLOv8 strip surface defect detection technology[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):167-172.

T形槽底部微孔复合织构化密封性能分析

曹国栋,穆塔里夫·阿赫迈德.T形槽底部微孔复合织构化密封性能分析[J].组合机床与自动化加工技术,2025(4):173-176.

CAO Guodong, MUTELLIP Ahmat. Analysis of the sealing performance of microporous composite texture at the bottom of T-groove[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):173-176.

基于iTransformer模型的工业机器人关节迟滞建模研究

党选举,沈远桂.基于iTransformer模型的工业机器人关节迟滞建模研究[J].组合机床与自动化加工技术,2025(4):177-182.

DANG Xuanju, SHEN Yuangui. Modeling of joint hysteresis in industrial robots based on iTransformer models[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):177-182.

基于多样性激励GAN及MobileViT的带钢缺陷分类方法

刘劲豪,金红,谢晓兰,等.基于多样性激励GAN及MobileViT的带钢缺陷分类方法[J].组合机床与自动化加工技术,2025(4):183-187,194.

LIU Jinhao, JIN Hong, XIE Xiaolan, et al. Strip steel defect classification method based on variety-stimulated generative adversarial network and MobileViT[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):183-187,194.

考虑工人约束的分布式柔性作业车间调度问题研究

闫炳龙,叶春明.考虑工人约束的分布式柔性作业车间调度问题研究[J].组合机床与自动化加工技术,2025(4):188-194.

YAN Binglong, YE Chunming. Research on distributed flexible job shop scheduling problem considering worker constraints[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):188-194.

基于状态空间扩展的深度强化学习混合流水车间调度

汤怀钰,王聪,张宏立,等.基于状态空间扩展的深度强化学习混合流水车间调度[J].组合机床与自动化加工技术,2025(4):195-200.

TANG Huaiyu, WANG Cong, ZHANG Hongli, et al. Hybrid flow shop scheduling with deep reinforcement learning based on state space expansion[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2025(4):195-200.

【推荐阅读】

以上文章版权归组合机床与自动化加工技术杂志社所有，欢迎参考引用，请于文章参考文献中著录！

电   话：0411-86645290

E-mail：zhjcqk@126.com

网   址：http://zhjcz.com.cn/